Liuyang Happiness Firing Systems Co. Ltd

1. Support both wire and wireless control.Remote distance can reach 500M(depend on surroundings);
2. Powered by 12.6V internal rechargeable lithium battery, which charge from 110V/220V AC for 5 hours and can keep working for
48 hours; with battery low indicator;
3. With 24 memory indicator . The LED will turns RED when you press the buttons beside;
4. With “rapid” –sequential function. The sequential time range is from 0.1-9.9S. (adjustable);
5. Programmable-you can add more receivers into a transmitter, the maximum is 100 receivers, and the program way is very easy.

1. Support both wire and wireless control.Remote distance can reach 500M(depend on surroundings);
2. Powered by 12.6V internal rechargeable lithium battery, which charge from 110V/220V AC for 5 hours and can keep working for
48 hours; with battery low indicator;
3. With 24 memory indicator . The LED will turns RED when you press the buttons beside;
4. With “rapid” –sequential function. The sequential time range is from 0.1-9.9S. (adjustable);
5. Programmable-you can add more receivers into a transmitter, the maximum is 100 receivers, and the program way is very easy.

(4 channels in a receiver)
1. With low battery indicator; the 4 cues could program by one time;
2. Transmitter frequency:433Mhz, remote range:150-30ÓM(+/-) depending on surroundings;
3. Remote power source: 1pcs 9v battery;
4. Receiver power source: 6V requires 4pcs AA batteries;All with antenna;
5. Firing capacity:1-2 talon igniters or 4-5 e-matches when connected in series;
6.”fire all” “sequential fire” , and “One by one fire” functions;

1. Remote distance:400-500M (+/) depending on surroundings;
2. Powered by 6pcs AA battery. With low battery indicator;
3. with antenna, more stable.Frequency:433Mhz;
4.”fire all” “sequential fire” , and “One by one fire” functions;
5.With launching lamp. It could light when the transmitter is launching successfully;
6.It could divide into 100districts, each district has 12 buttons. So it could control 1200 cues in total;
7.Waterproof case

Feature: Interchangeable, Programmable Fireworks Firing System
Battery: 3.7V Battery Both For The Receiver And The Controller
Firework Type: Cake Fireworks, All Kinds Fireworks
Remote Distance: 200M Wireless Control Fireworks Firing System
Fire function: Salvo Fire, Sequential Fire Fireworks System
Channels: 1 ReceiversX12 Cues, 12 cues/channels
Control Mode: Remote Control
Occassion: Fireworks Display
Frequency: 433Mhz
Sequential time range:0.01~99.9s

These electric igniters / e-matches are for igniting almost any consumer firework.
In combination with our firing systems they allow you to remotely fire a firework show.
Each igniter clips securely to the visco delay fuse of a firework.
They are very reliable and do not contain any pyrotechnic material.
These are single use devices. Once they burn out and ignite the firework, they must be discarded.
Technical Parameters
1. 21°C(70°F)resistance:1.3±0.15Ω — 1.7±0.15Ω
2. Fire current: 0.40A /0.37A
3. Safety current: 0.25A 5S/0.18A 5S
4. Testing current: 0.5MA

These fireworks ematches with pyrogen and stable special for fast fuse, Normally use in fireworks dispaly, lf you need other color or other size is available.
Technical Parameters
1. 21°C(70°F)resistance 1.3±0.15Ω — 1.7±0.15Ω
2. Fire current: 0.40A /0.37A
3. Safety current: 0.25A 5S/0.18A 5S
4. Testing current: 0.5MA
Attention: Pls first connecting the fuse and igniter well, then put the igniter inside the firing system.

This is a method to fire consumer fireworks with instant ignition – no need to wait for the fuse. These are perfect for firing tightly timed pyromusicals where effects are firing to beats in music, or you wish to have multiple cakes firing at the exact same time across multiple positions. They work by inserting the initiator into a small plastic clip which inserts directly into the lift-charge of the firework.

Light weight, Strong, Many Colors to select from
Unsaturated polyester: 40%
Glass fabric: 56%
Glass fiber yarn: 3%
Calcium carbonate : 1%

Aluminum atloy racks
1. Usage: for single shot or fountains display. Saving the labor cost and with stable effects for fireworks. More popular in the display nowr.
2 inch rack for the fireworks tube size 32-64mm (fireworks outer diameter)
2. Each tube has a stainless steel leaf spring, it can be adjusted by different size fireworks,;
3.304 stainless steel screw available

This kind of fireworks display rack for loading the 3″ mortar tubes, suitable for shell display which the size is 3″. Columns use 40*2mm thick square tube to make, display rack use 2mm thick steel plate bending forming; Frame use 2mm thick steel to make; The upper part of the display rack use 30*3mm thick flat steel to make. General gross weight 29KGs. Max angle is 30 degree.

This kind of fireworks display rack is suitbale for single shots, And it’s meterial is Pure aluminium alloy .

Can be used for celebrations, such as weddings, Christmas, etc.Paper shells and paper lift cups are usually used together.Firework Type
Display Shell.

Certificate: RoSH, DGM(can be shipped by air)
Advantage: Metal powder, smokeless, smellless, safety
Application: Thanksgiving
Usage: Spark machine, cold fountain fireworks
Firework type: Fountain
Duration:15-20min
Height:1.5-3m;15-3m;2-5m